<address id="66666"><font id="66666"></font></address>

<address id="66666"></address>

    <address id="66666"><font id="66666"></font></address>

    <address id="66666"></address>

      <address id="66666"><font id="66666"></font></address>

      <address id="66666"></address>

        欢迎来到无锡宇辉地坪工程有限公司官网!

        无锡环氧地坪

        环氧地坪-无振动止滑坡道施工服务公司

        免费测量勘测-可根据客户的实际使用状况和预算量身定做

        咨询热线
        15052206188

          案例展示

          联系我们

          无锡宇辉地坪工程有限公司
          联系人:周经理
          传真:0510-88585186
          手 机:15052206188
          邮 箱: 2017153541@qq.com 
          地 址: 江苏省无锡市北塘区会岸路88-51

          无震动防滑坡道施工用量分析详解
          您的位置: 首页 >> 案例展示 >> 地下车库 >> 详细信息

          无震动防滑坡道施工用量分析详解

          发布时间:2019-03-15 浏览:139次 字号:  
          无震动防滑坡道多用于车库出入口的斜坡,起到防滑减震的功能,增加车辆行驶的安全系数。无震动防滑坡道是怎么施工的呢,用量怎么把握呢?无震动防滑坡道施工简单方便,分为抗压层和止滑层,抗压层用于;せ〉孛娌槐荒ニ,止滑层用于表面防滑处理,保证车辆安全行驶,增加行驶摩擦力,以此来达到防滑的效果。
          Non-vibration anti-landslide lane is mostly used in the ramp of garage entrance and exit, which has the function of anti-skid and anti-shock, and increases the safety factor of vehicles. How to construct the non-vibration anti-landslide road and how to grasp the dosage? The construction of non-vibration anti-slide road is simple and convenient, which is divided into compressive layer and anti-slide layer. The anti-slide layer is used to protect the foundation ground from wear and tear, and the anti-slide layer is used for surface anti-skid treatment to ensure safe driving of vehicles and increase driving friction, so as to achieve anti-skid effect. 无震动防滑坡道的施工厚度对于其使用寿命有一定的影响,一般施工厚度在6mm左右,可以达到正常使用标准,如果想达到10年以上的使用寿命,施工厚度在10mm以上,那厚度的不同对于用量应该怎么算呢?
          The construction thickness of non-vibration anti-landslide lane has a certain influence on its service life. Generally, the construction thickness is about 6 mm, which can meet the normal service standard. If the construction thickness is over 10 mm to achieve the service life of more than 10 years, how should the different thickness be calculated for the consumption?
           
          如果防滑坡道施工厚度在6mm的话,一般是抗压层2mm,材料用量在4kg,止滑层4mm,材料用量在6kg,具体情况还需要参考基础地面,基础地面起砂起壳严重的话还需要进行修补处理的。具体施工步骤如下图:
          If the construction thickness of anti-slide road is 6 mm, it is generally 2 mm compression layer, 4 kg material consumption, 4 mm anti-slide layer and 6 kg material consumption. The specific situation also needs to refer to the foundation ground. If the sand and shell of the foundation ground are serious, it needs to be repaired. The concrete construction steps are as follows:
           
          网站怎样挣钱 720| 896| 421| 209| 379| 246| 324| 113| 138| 637| 295| 846| 241| 609| 924| 17| 964| 622| 425| 833| 19| 769| 296| 547| 522| 484| 288| 447| 948| 910| 136| 624| 297| 957| 473| 186|